Example of a finished black lava, hematite and rose quartz stretch bracelet

How to make stretch bracelets with lava beads

To make a stretch lava bead bracelet, measure your wrist, add about 1–2 cm of ease, then string round lava beads onto pre-stretched elastic cord and finish with a surgeon’s knot hidden inside a bead. An adult 18 cm (7 inch) wrist takes about 30 × 6 mm beads or about 23 × 8 mm beads. An 8 mm black lava strand is $3.82 AUD and has 46 beads — enough for two adult bracelets — and a 10 m reel of stretch cord starts at $4.55 AUD. DIY bracelet kits include the beads and cord to make five to seven bracelets, from $19.95 AUD with free Australian postage. Orders ship from the Gold Coast, Queensland, via Australia Post.

Prices and stock in this guide were checked against the live catalogue. Questions? Email admin@lavabeads.com.au, Monday to Friday, 9am–5pm AEST.

What you need

You only need beads, stretch cord, and a pair of scissors. Fine jewellery glue is optional, for extra hold on the knot. Standard lava bead strands have a hole of about 1 mm, so use 0.8 mm or 1.0 mm elastic. A large-hole 8 mm lava bead (2.5 mm hole) can take thicker cord if you prefer.

Beads and stretch cord (18 November 2026)
ItemWhat’s in itPrice (AUD)Stock when checkedProduct
4 mm black lava89 beads, 38 cm strand, ~1 mm hole$1.00In stockBlack Lava Beads 4mm
6 mm black lava64 beads, 37 cm strand, ~1 mm hole$3.45In stockLava Beads 6mm Black
8 mm black lava46 beads, 36 cm strand, ~1 mm hole$3.82In stockLava Beads 8mm Black
10 mm natural lava38 beads, 35 cm strand, ~1 mm hole$3.95In stockNatural Lava Beads 10mm Strand
Flat clear stretch cord, 10 mClear elastic, enough for many bracelets$4.55In stockFlat Elastic Crystal String 10m
Clear crystal stretch cord, 10 mRound clear stretch thread$4.75In stockCrystal String Stretch Clear Thread 10m
Black stretch cord, 1.0 mm, 5 mBlack elastic, good with dark beads$6.75In stockBlack Stretch 1.0mm Beading Thread

If you would rather have a mixed set already counted out, the DIY Bracelet Kits include lava beads, matching stones or heishi, and stretch cord. Current kits are $19.95 or $23.95 and make five to seven adult bracelets, which is about $2.85 to $4.00 each. Every kit qualifies for free Australian postage.

How many beads for your wrist

Measure your wrist with a tape, then add 1–2 cm so the bracelet slides on comfortably without being loose. Divide that length by the bead size. The figures below are a starting point for a snug-to-comfortable adult fit; always check against your own measurement before tying the knot.

Approximate bead counts for an 18 cm (7 inch) adult wrist
Bead sizeBeads for 18 cmBracelets from one strand
4 mmAbout 45One strand (89 beads) makes two
6 mmAbout 30One strand (64 beads) makes two
8 mmAbout 23One strand (46 beads) makes two
10 mmAbout 18One strand (38 beads) makes two

You can mix sizes — for example 12 lava beads, 12 hematite beads and a few smaller spacers — as long as the finished length still matches your wrist plus ease.

Step-by-step: string a stretch bracelet

1. Cut and pre-stretch the cord

Cut a piece of elastic about 30–35 cm long. You need extra length for tying. Pull the cord gently a few times so it won’t keep stretching after you have tied the knot. This is the step that stops a new bracelet going baggy in the first week.

2. String the beads

Tape one end of the cord to the table, or hold it, so beads can’t slide off. Thread the beads in your chosen order. A simple pattern is lava beads all the way around, or lava beads with a gemstone or heishi accent every few beads. Leave about 5–7 cm of bare cord at each end for the knot.

3. Check the fit before you tie

Wrap the strung beads around your wrist (or a ruler set to your target length) before knotting. Add or remove a bead now, while it is still easy.

4. Tie a surgeon’s knot

A surgeon’s knot is a reef knot with an extra pass on the first throw, so it grips elastic better than a single knot. Pull it firm, but not so tight that the bracelet sits in a stiff circle. Tie a second knot on top. If you use jewellery glue, put a tiny drop on the knot and let it dry before trimming. Do not glue the elastic to the beads.

5. Hide the knot and trim

Work the knot inside the nearest bead with a larger hole, or into the gap between two beads, then trim the spare cord close to the knot. Stretch the bracelet gently once or twice so the knot settles.

Optional: a drop of essential oil

Lava beads are porous, so a drop of essential oil can soak into the stone and the scent is released while you wear the bracelet. Put one or two drops on the lava beads only, not on the elastic and not on gemstones or clay heishi. Let the oil soak in before you put the bracelet on. This is a practical making note, not a health or medical claim. For sizes, oils and care in more detail, see the lava bead diffuser bracelet guide.

Care and common mistakes

  • Don’t overstretch the bracelet when putting it on — roll it over the hand where you can.
  • Keep the elastic dry when you can. Water and lotions shorten the life of stretch cord.
  • Avoid tying the knot too loose (the bracelet slips off) or too tight (the elastic is under constant strain).
  • Replace the cord when the bracelet starts to sag. The beads can be restrung.
  • Store it flat or in a small pouch, not hanging, so the elastic isn’t left under load.

Start with a kit, or pick your own beads

The quickest way to make several matching bracelets is a DIY bracelet kit. Each kit is packed with the beads and stretch cord for five to seven adult bracelets, and every kit ships free within Australia. If you already know your size and colours, start with an 8 mm black lava strand and a reel of flat clear stretch cord — together they are under $15, so add another strand if you want to reach the free-postage threshold. Ready-made 8 mm stretch bracelets are also available from $2.50 if you want one already strung, such as the 8 mm lava and gemstone stretch bracelet.

Free Australian shipping on orders over $15 AUD; under $15 the checkout rate is $5.65. International orders over $150 AUD ship free, otherwise a $30.00 flat rate applies. Typical dispatch is 1–2 business days, Monday to Friday.

Leave a Reply

Your email address will not be published. Required fields are marked *